Product Reviews

TP-Link TL-SG105 Review: A Simple Five-Port Gigabit Switch

A practical fit for homes or small workspaces that need a quiet, unmanaged way to add wired Ethernet connections.

This article contains affiliate links. We may earn a commission if you buy through them, at no extra cost to you.

The TP-Link TL-SG105 is a compact, unmanaged Ethernet switch for adding wired connections where a router or network outlet does not provide enough ports.

This tp link tl sg105 switch review focuses on its five Gigabit ports, simple setup, quiet design, and the limits to consider before buying.

TL-SG105 Switch Review Summary

The quick verdict

TP-Link TL-SG105
4.7/5

130,000+ ratings

Read Amazon Reviews

TP-Link TL-SG105

A practical fit for homes or small workspaces that need a quiet, unmanaged way to add wired Ethernet connections.

  • Five RJ45 ports support 10/100/1000 Mbps connections with auto-negotiation and Auto MDI/MDIX.
  • Unmanaged plug-and-play operation requires no software installation or configuration.
  • IEEE 802.3X flow control is included for data transfer management.
  • Port-based 802.1p/DSCP QoS and IGMP Snooping support traffic prioritization and handling.

Pros

  • Five Gigabit ports expand wired connectivity in a small setup.
  • No configuration or software installation is required for basic use.

Consider before buying

  • Five ports may be restrictive if you need to connect many devices at one location.
  • As an unmanaged switch, it is intended for straightforward expansion rather than settings-heavy network administration.
Read the full review summary

The TL-SG105 offers five auto-negotiating 10/100/1000 Mbps Ethernet ports in a small metal desktop or wall-mountable case. Plug-and-play setup keeps routine expansion straightforward, while flow control and traffic prioritization features add useful network handling without requiring software configuration.

It suits buyers who want to connect several wired devices in one room, such as computers, televisions, consoles, or network equipment, and prefer a fanless switch.

Its five-port capacity is the key constraint: check how many wired connections you need at the switch location, including the cable back to your router, before choosing it.

The buying factors

TL-SG105 Switch Scorecard

Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.

7/10

Port capacity

Five Gigabit Ethernet ports are useful for a small cluster of wired devices, though capacity is limited for larger setups.

8/10

Gigabit connectivity

All five ports support 10/100/1000 Mbps negotiation, making it suitable for common wired network connections.

9/10

Setup simplicity

The unmanaged, plug-and-play design needs no software installation or configuration.

7/10

Traffic handling

Port-based 802.1p/DSCP QoS and IGMP Snooping provide traffic management features for supported network uses.

8/10

Noise and placement

A fanless metal design supports quiet operation, and the case can sit on a desk or be wall mounted.

7/10

Power efficiency

Energy-efficient technology is designed to expand network capacity with less power consumption, though no measured savings are specified.

Key Features and Specifications of TL-SG105 Switch

  • Five RJ45 ports support 10/100/1000 Mbps connections with auto-negotiation and Auto MDI/MDIX.
  • Unmanaged plug-and-play operation requires no software installation or configuration.
  • IEEE 802.3X flow control is included for data transfer management.
  • Port-based 802.1p/DSCP QoS and IGMP Snooping support traffic prioritization and handling.
  • Fanless metal casing is designed for quiet operation, with desktop and wall-mounting options.
  • The compact case measures about 3.94 × 3.85 × 0.98 inches.
  • The product information lists a three-year warranty and weekday technical support hours; confirm the applicable coverage for your region and purchase.

Pros and Cons of TL-SG105 Switch

Pros

  • Five Gigabit ports expand wired connectivity in a small setup.
  • No configuration or software installation is required for basic use.
  • Fanless design avoids fan noise during operation.
  • QoS and IGMP Snooping provide useful traffic-handling features for compatible network needs.
  • Metal case and desktop or wall-mounting design offer flexible placement.

Consider before buying

  • Five ports may be restrictive if you need to connect many devices at one location.
  • As an unmanaged switch, it is intended for straightforward expansion rather than settings-heavy network administration.
  • The product information does not describe power over Ethernet; if you need a switch to power connected equipment, confirm that capability before buying.

Who Should Buy TL-SG105 Switch?

Good fit

Consider the TL-SG105 if you have a router or wired network connection nearby and need a few additional Ethernet ports for stationary devices.

Its plug-and-play design keeps setup simple, and the fanless case is well suited to a desk, shelf, or wall-mounted position where operating noise matters.

It is also a reasonable match when basic traffic prioritization features could be useful alongside ordinary wired connectivity.

Before ordering, count the devices that will connect to the switch and include the uplink to the router in that count; the five-port total leaves four ports for downstream devices when one port is used for that connection.

Who should skip it

Look elsewhere if your installation needs more than a small handful of wired connections at one point, or if you need managed controls to configure the network in detail.

If a connected device must receive power over Ethernet from the switch, verify that the model you choose supports that requirement before proceeding.

How the TL-SG105 Switch Fits a Small Network

Count the ports around the uplink

A five-port switch expands a network, but one connection typically links it back to the router or existing network.

That leaves four ports for devices in a basic arrangement, so this model fits a desk cluster or small entertainment setup more naturally than a location with many wired endpoints.

Gigabit negotiation keeps connections flexible

Each port supports 10/100/1000 Mbps and automatically negotiates the connection.

This allows the switch to work with devices at different supported link speeds, while the network path and connected equipment still determine what speed a particular transfer can achieve.

Traffic features add options without routine setup

The switch includes port-based 802.1p/DSCP QoS and IGMP Snooping, along with IEEE 802.3X flow control.

These can be relevant in networks carrying different types of traffic, but they do not turn an unmanaged switch into a device for extensive manual network configuration.

Quiet placement is part of the appeal

The fanless metal case is designed for quiet use, and desktop or wall mounting gives buyers more than one placement option.

Measure the available spot and plan cable routing before installation, particularly if the switch will sit out in the open or be mounted near other equipment.

Alternatives to TL-SG105 Switch

No alternative model is recommended here. Compare the port count, management needs, and power requirements that matter to your setup before choosing another switch.

Is TL-SG105 Switch Worth It?

The TP-Link TL-SG105 is worth considering for buyers who need a straightforward way to add a few wired Gigabit connections. Its five ports, plug-and-play setup, fanless metal case, and traffic-handling features make it a practical small-network option.

Buy it if four available device ports after the router connection are enough and an unmanaged design matches your needs. Choose a different switch if you need a larger port count, detailed management controls, or power over Ethernet.

Your review at a glance

TP-Link TL-SG105
4.7/5

130,000+ ratings

Read Amazon Reviews

TP-Link TL-SG105

A practical fit for homes or small workspaces that need a quiet, unmanaged way to add wired Ethernet connections.

  • Five RJ45 ports support 10/100/1000 Mbps connections with auto-negotiation and Auto MDI/MDIX.
  • Unmanaged plug-and-play operation requires no software installation or configuration.
  • IEEE 802.3X flow control is included for data transfer management.
  • Port-based 802.1p/DSCP QoS and IGMP Snooping support traffic prioritization and handling.

Written by

midwestcityok.net Editorial Team

Editorial team

Independent editorial coverage of local life & small business.

Amazon customer reviews

See what buyers think

Explore customer reviews, photos and available video reviews on Amazon.

TP-Link TL-SG105

TP-Link TL-SG105

A practical fit for homes or small workspaces that need a quiet, unmanaged way to add wired Ethernet connections.

  • Five RJ45 ports support 10/100/1000 Mbps connections with auto-negotiation and Auto MDI/MDIX.
  • Unmanaged plug-and-play operation requires no software installation or configuration.
Check Video Reviews on Amazon